Abstract
Flow and heat transfer characteristics on the flat tip have been studied in a large-scale turbine blade cascade for a tip gap-to-span ratio of h/s = 1.5%. The present heat/mass transfer experiment by employing the naphthalene sublimation method with a high spatial resolution proves the existence of a chord-wise repeated thermal load change on the flat tip in the region between the leading edge and mid-chord. In this region, there are discrete local peaks of thermal load repeated along the pressure side, contrary to a continuous peak line downstream of the mid-chord. Each discrete peak has an aft ridge extending toward the suction side. The surface flow visualizations reveal that there exists a chord-wise repeated tip gap flow change between the leading edge tip gap vortex system and the stable separation bubble downstream of the mid-chord. The chord-wise repeated thermal load change seems to have a close relation to the chord-wise repeated flow change. Further investigations will be needed to understand exactly how, why, and when the repeated change happens.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.