Chlorine evolution and char characteristics during pyrolysis upgrading of Xinjiang high chlorine coal

Abstract

Xinjiang ShaErHu (SEH) coal, characterized by a high chlorine concentration exceeding 1 %, can cause severe chlorine corrosion when directly burned. To utilize this high-chlorine coal in an effective and clean way, specific pretreatments such as low-temperature pyrolysis upgrading are required. In this paper, the changes in tar, pyrolysis gas, combustion characteristics, and chlorine evolution features were analyzed during the low-temperature pyrolysis of SEH coal. The effects of increasing temperature (350 °C, 450 °C, and 550 °C) were studied. The results show that the proportion of aromatic compounds released consistently increases with temperature, reaching a peak of 80 % at 550 °C in the tar. It is noteworthy that chlorine is hardly detected in tar. The percentage of chlorine released in the pyrolysis gas remains relatively stable as the temperature rises from 350 °C to 550 °C, accounting for approximately 17.5 % of the total chlorine. The percentages of water-soluble chlorine in raw coal, char-350 °C, char-450 °C and char-550 °C are 74.3 %, 80.4 %, 82.2 %, and 55.1 % respectively. The majority of the chlorine in the char produced at 350 °C and 450 °C is inorganic, making up 68.9 % and 69.4 %, respectively. In contrast, char generated at 550 °C has 58.4 % chlorine that is primarily organic. About 40 % of the inorganic chlorine is converted to organic chlorine when the pyrolysis temperature is raised to 550 °C. This conversion likely occurs as a result of the inorganic chlorine ions combining with carbon to form C-Cl bonds. In order to effectively prevent high temperature corrosion, high-chlorine coal can be treated by pyrolysis at temperatures between 350 and 450 °C, followed by water washing and burning. This research provides a theoretical foundation for the clean and efficient use of high-chlorine coal.