Abstract
Chlorination rate of ZnFe2O4 with Ar-Cl2-O2 gas was measured at 1023 to 1123 K by gravimetry. The effects of temperature, partial pressures of chlorine and oxygen on the rate were investigated. Zinc oxide contained in ZnFe2O4 specimen was selectively chlorinated and evaporated in gas, while iron oxide remained as oxide in a chlorinated residue. Chlorination rate increased with increasing partial pressure of chlorine. On the other hand, chlorination rate slightly decreased with increasing partial pressure of oxygen and chlorination of iron oxide was prevented. Since the order of chlorination rate with respect to partial pressure of chlorine was approximately 0.5, the rate-determining step of chlorination is considered to be the dissociative adsorption of chlorine gas on the surface of solid ZnFe2O4. Decrease of chlorination rate with the increase of partial pressure of oxygen could be explained by the occupation of adsorption sites of chlorine atoms by oxygen and the chlorination rate was expressed as functions of partial pressures of chlorine and oxygen as r=k·(P_Cl2^1/2/1+K_OP_O2^1/2) The activation energy of chlorination was 35.1±2.2 kJ/mol which is relatively small compared to that of ZnO chlorination reaction (58.2 kJ/mol). It is considered that this low activation energy is due to the weak adsorption of chlorine atom on the adsorption site.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.