Abstract
The effect of carbonation on the chloride resistance of low-carbon steel and two Cr-bearing alloy steels in simulated concrete pore solutions was investigated. The chloride threshold values of steels were determined on the basis of corrosion potential (Ecorr) and polarization resistance (Rp). Moreover, the chloride-induced corrosion behavior of steels was evaluated using electrochemical impedance spectroscopy, cyclic voltammetry, cathodic potentiodynamic polarization, and scanning electron microscopy/energy dispersive X-ray spectroscopy measurements. Alloy steels have higher chloride resistance than low-carbon steel in carbonated and non-carbonated concrete pore solutions. The chloride resistance of alloy steels improves with increasing Cr content. In addition, the chloride resistance of all steels is negatively affected by the carbonation of concrete pore solution, especially for alloy steel with high Cr content in the presence of high chloride content.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Minerals, Metallurgy and Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.