Chitosan intercalated montmorillonite: Preparation, characterization and cationic dye adsorption

Abstract

Chitosan intercalated montmorillonite (Chi-MMT) was prepared by dispersing sodium montmorillonite (Na +-MMT) into chitosan solution at 60 °C for 24 h. The Chi-MMT was characterized by XRD, XRF and FT-IR. The intercalation was accomplished via the ion-exchange of Na + ions with –NH 3 + of chitosan, resulting in the expansion of d 001 from 1.42 nm of Na +-MMT to 2.21 nm of Chi-MMT. The chitosan content in the Chi-MMT measured by TGA was about 17 mass%. The adsorption capacity of Chi-MMT was investigated in comparison with the starting Na +-MMT and chitosan using three different cationic dyes, i.e. basic blue 9 (BB9), basic blue 66 (BB66) and basic yellow 1 (BY1). The Chi-MMT showed the highest adsorption capacity in the range of 46–49 mg/g when the initial dye concentration was 500 mg/L, being equivalent to 92–99 wt.% of dye removal. The adsorption capacities of Chi-MMT for all basic dyes increased with an increase of initial dye concentration. An increase of adsorption capability of Chi-MMT was attributed to the existence of intercalate-chitosan. It could enlarge the pore structure of Chi-MMT, facilitating the penetration of macromolecular dyes, and also electrostatically interact with the applied dyes. These results indicated the competency of Chi-MMT adsorbent for basic dye adsorption.