Abstract
We report here the application of water spray cooling directly to the top surface of a lateral diffused metal oxide semiconductor field effect transistor (LD-MOSFET) in a 500-MHz RF power amplifier. With the amplifier running in Class A, spray cooling at a flow of 0.14 l/min increases the output power from 66 W to 84 W, and the power-added efficiency increases from 26% to 34%, all at 34 W input. This improvement is attributed to a large spray-induced reduction in junction temperature and total package thermal resistance. At the point of highest measured RF output and DC power dissipation, the reduction in junction temperature and total thermal resistance were estimated to be from /spl ap/214/spl deg/C to /spl ap/115/spl deg/C and from /spl ap/1.5/spl deg/C/W to /spl ap/0.6/spl deg/C/W, respectively, and the maximum spray-induced heat flux was /spl ap/162W/cm/sup 2/. In Class AB, the increase in output power and power-added efficiency are less, /spl ap/8%, but the amplifier can be driven harder before failure occurs. The maximum output in class AB is 79 W compared to 70 W without spray cooling.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Components and Packaging Technologies
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
