Abstract
We report here on 90 at.% copper 2–4 mm thick castings with fracture strengths up to 1.9 MPa due to the formation of a thick, scratch-resistant nanocrystalline chill-zone next to the copper mold contact surfaces. It is found that the unusually hard nanocrystalline surface layers of thicknesses in the range of 200–300 μm form when the melt can be undercooled: when the alloy composition is such that the contact surface of the copper mold with the liquid alloy does not serve as a preferred site for crystal nucleation, supercooling of the melt in the chill-zone is possible. These castings are the hardest coppers ever reported to date in macroscopic specimens. They have mechanical strength superior to those of many stainless steels as well as to Cu–Be alloys and of the order of those of Cu-based bulk metallic glasses (BMGs) of similar dimensions. In addition, and unlike in copper-based BMGs, the color and luster can be tailored by elemental additions to vary from copper-like to gold-like.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.