Abstract
Hydrazine was used as a coreactant with tetrakis(dimethylamido)titanium for the low-temperature chemical vapor deposition of TiN between 50 and 200 °C. The TiN film-growth rates ranged from 5 to 45 nm/min. Ti:N ratios of approximately 1:1 were achieved. The films contain between 2 and 25 at.% carbon, as well as up to 36 at.% oxygen resulting from diffusion after air exposure. The resistivity of these films is approximately 104 μΩ cm. Annealing the films in ammonia enhances their crystallinity. The best TiN films were produced at 200 °C from a 2.7% hydrazine–ammonia mixture. The Ti:N ratio of these films is approximately 1:1, and they contain no carbon or oxygen. These films exhibit the highest growth rates observed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
