Chemical Separation of Tungsten and Other Trace Elements for TIMS Isotope Ratio Measurements Using Organic Acids

Abstract

One requirement for isotope ratio measurement results with small measurement uncertainties is that the element of interest is effectively separated from the sample matrix. Efficient chemical separation of W from matrix components, especially Ti, can be challenging, particularly for large test portion masses (> 1 g). We present a new W separation procedure that takes advantage of the distinct complexation behaviour of Ti and W with citrate ligand in a moderately low pH, oxidising solution. This preparation procedure can reduce the Ti/W ratio of large (4–10 g) basaltic (i.e., high‐matrix) test portions by a factor of 105, relative to their original compositions, in a two‐step separation procedure. The procedure additionally provides a separate, well‐purified Mo fraction. We show that optimal separation requires precise selection of reagent concentrations and sample load. The procedure was employed to determine the μ182W composition of BHVO‐2 as −6.7 ± 4.2 (2 standard deviation, 2s). The principles derived from this method may prove useful for chemical separation of other elements used for geochemical and cosmochemical applications given an appropriate selection of organic acid. Future successful applications of this method may reveal that the use of organic acids as procedural reagents is a currently under‐utilised tool for efficient chemical separation protocols.