Chemical reagent for detecting tension wood in selected tree species

Abstract

Reaction wood is a wood defect arising during the growth of the tree in the part of the trunk that is under tension (hardwood tree species) or compression (coniferous tree species). Beech (Fagus sylvatica L.) tension wood has different anatomical and chemical characteristics than normal (opposite) wood. The difference in density is conditioned by the percentage of the gelatinous layer (G-layer). Fibre cells in reaction beech wood have a different cell wall structure and a different chemical composition. Tension wood cannot be detected by the naked eye. It is only possible to assume its occurrence based on the macroscopic characteristics of the logs, such as a woolly surface, taper or eccentric pith, and so forth. However, these are imprecise and unreliable methods that have minimal effectiveness, especially when shortening the length of the log for cut-outs. This study aimed to create a unique chemical reagent for the detection of tension wood in logs and timber and wood products immediately. The present research can contribute to the mitigation of flaws resulting from the reaction of wood in timber production while addressing noticeable constraints in manufacturing, such as energy resources and the availability of wood raw materials. This can be achieved through the efficient identification of reaction wood in materials. The colour change is only temporary and will fade over time. After the chemical reagent has dried on the surface, the surface can be milled. The colour change extends to a depth of approx. of 3 to 5 mm.