Abstract
ABSTRACTA green‐chemistry approach to improve the moisture resistance of soy flour (SF)‐based wood adhesive is described. Chemical phosphorylation of SF (PSF), using POCl3 as the phosphorylating agent, dramatically increased its wet bond strength. The optimum POCl3:SF ratio that produced maximum wet bond strength was about 0.15 (g g−1). The increase in wet bond strength of PSF (PSF0.15) was mostly due to the phosphate groups incorporated into the proteins and carbohydrates, and to a lesser degree to phosphorylation‐induced protein denaturation. The attached phosphate groups acted as cross‐linking agents, either via covalent esterification with hydroxyl groups on wood chips or via ionic and hydrogen‐bonding interactions with functional groups in wood chips. At hot‐press temperatures above 160°C the wet bond strength of PSF0.15 was >2.6 MPa, a level that might be acceptable for interior‐used hardwood plywood and particleboard. POCl3 is a low cost, general‐purpose reagent and therefore PSF‐based adhesive is expected to be environmentally friendly. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40451.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.