Chemical Imaging of Mass Transport Near the No-Slip Interface of a Microfluidic Device using Attenuated Total Reflection–Fourier Transform Infrared Spectroscopy

Abstract

Mass transport in geometrically confined environments is fundamental to microfluidic applications. Measuring the distribution of chemical species on flow requires the use of spatially resolved analytical tools compatible with microfluidic materials and designs. Here, the implementation of an attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) imaging (macro-ATR) approach for chemical mapping of species in microfluidic devices is described. The imaging method is configurable between a large field of view, single-frame imaging, and the use of image stitching to build composite chemical maps. Macro-ATR is used to quantify transverse diffusion in the laminar streams of coflowing fluids in dedicated microfluidic test devices. It is demonstrated that the ATR evanescent wave, which primarily probes the fluid within ∼500 nm of the channel surface, provides accurate quantification of the spatial distribution of species in the entire microfluidic device cross section. This is the case when flow and channel conditions promote vertical concentration contours in the channel as verified by three-dimensional numeric simulations of mass transport. Furthermore, the validity of treating the mass transport problem in a simplified and faster approach using reduced dimensionality numeric simulations is described. Simplified one-dimensional simulations, for the specific parameters used herein, overestimate diffusion coefficients by a factor of approximately 2, whereas full three-dimensional simulations accurately agree with experimental results.