Chemical effects of ferrocene and 2-ethylhexyl nitrate on a low-octane gasoline: An experimental and numerical RCM study

Abstract

An in-depth understanding of fuel additives chemical effects is crucial for optimal use or additive design dedicated to more efficient and cleaner combustion. This study aims at investigating the effect of an organometallic octane booster additive named ferrocene on the combustion of a low-octane gasoline at engine-relevant conditions. Rapid compression machine experiments were carried out at 10 bar, from 675 to near 1000 K for stoichiometric (Φ = 1) and lean (Φ = 0.5) mixtures. The neat surrogate fuel was a blend of toluene and n-heptane whose research octane number was 84. The doping level of additive was set at 0.1% molar basis. Ferrocene does not show a remarkable effect on the 1st- stage ignition but presents a strong inhibiting effect on the main ignition of the surrogate fuel at both equivalence ratios. The inhibiting effect increases with temperature within the investigated range. The negative temperature coefficient (NTC) behavior of the surrogate fuel is enhanced by ferrocene. A kinetic model developed by literature data assembly as well as a novel sub-mechanism involving the formation of alcohols from the reactions of iron species is proposed. The kinetic model developed simulates the inhibiting effect of ferrocene reasonably well at both equivalence ratios. Thanks to the validated kinetic model, the chemical effect of ferrocene on the fuel combustion is explored and compared with 2-ethylhexyl nitrate (EHN), which is a conventional reactivity enhancer. Three major differences between the two additives were identified: the high-temperature stability of the fuel additive, the influence of additive on the toluene reactivity and the effect of the additive on the NTC behavior. The results presented in this study contribute to the in-depth comprehension of chemical effect of two fuel additives (ferrocene and EHN) having opposite effects on fuel reactivity.