Abstract
Copper patinas are generally regarded as aesthetically pleasing and are supposed to protect copper against further corrosion. The preparation of artificial sulphate patina on bronzes has been realized by immersing the bronze into CuSO4 solution. The effect of immersion time on the formation of the patina has been investigated. The sulphate patina obtained with immersion time of 500 h in CuSO4 solution consists of flat area and crystals. The flat area in the patina is mainly made of cuprite, whereas the crystals are mainly composed of brochantite. The electrochemical measurement of sulphate patina in simulated acid rain with pH 3.1 shows that the protective effectiveness of patina decreases with time and the dissolution of patina is the key factor leading to the degradation of patina. The investigation of the formation mechanism of sulphate patina shows that the cuprite layer forms on the surface of bronze in the initial patination. Then, crystal brochantite grows on the surface of cuprite by the oxidation of cuprite and the incorporation of CuSO4 solution.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Wuhan University of Technology-Mater. Sci. Ed.
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
