Charge transport and recombination in dye-sensitized solar cells based on hybrid films of TiO 2 particles/TiO 2 nanotubes

Abstract

In this paper, anodic TiO 2 nanotubes are blended into the TiO 2 mesoporous films based on P25 nanoparticles to assemble a list of dye-sensitized solar cells (DSSCs) with different nanotube concentrations. The electron properties of transport and recombination in the fabricated DSSCs are studied by using electrochemical impedance spectroscopy and the open-circuit voltage decay technique under AM 1.5 illumination. Results indicate that the electron lifetime increases with increasing the concentration of the anodic TiO 2 nanotubes, the electron transport time at a blending level of 10 wt% TiO 2 nanotubes is short as compared to that at 0 wt%, and above 10 wt%, the electron transport time has a trend of becoming large. Due to the combining effects of the electron transport and recombination, the electron collecting efficiency and the electron diffusion length obtain maxima at a blending level of 10 wt% nanotubes, which results in a highest short circuit current and a maximum energy conversion efficiency at this point in the DSSCs. This study gives a clear explanation for the performance enhancement of TiO 2 particle-based DSSCs at a blending level of 10 wt% anodic TiO 2 nanotubes and for the performance decrease at a blending level over 10 wt% anodic TiO 2 nanotubes from the angle of the electron transport and recombination. This study also supplies a feasible and easy way to improve the performance of particle-based DSSCs by restraining electron recombination and accelerating electron transportation.