Charge separation by switching heterojunction system from Type-II to S-scheme for enhanced photocatalytic activity: Environmental detoxification and H2 production

Abstract

The development of highly efficient photocatalysts is essential for harnessing solar energy for pollutant degradation and hydrogen (H2) production. This study provides a novel ternary S-scheme photocatalyst (Fe2O3/Bi2O3/g-C3N4), prepared from optimized binary 20-Bi-C via a simple electrostatic self-assembly method for the first time. Using various methods including UV–vis DRS, PL, ESR, photocurrent, Mott-Schottky, XPS, XRD, FTIR, SEM, TEM, and BET, the optical, structural, and morphological characteristics of the produced materials were fully studied. The photocatalytic performance of as-manufactured materials was evaluated through the degradation of the Ciprofloxacin (CIP) and H2 production. Under optimized conditions determined by the RSM method, a maximum CIP degradation of 97.20 % was achieved at a rate of 0.053 min−1, with the catalyst dosage: 0.44 g/l, CIP concentration: 26.07 mg/l, pH: 6.29 and Time: 63.01. The optimized heterojunction exhibited an exceptional photocatalytic H2 generation rate of 2428 μmol·g−1·h−1 within 2 h, surpassing the binary 20-Bi-C photocatalyst by 1.3 times. Furthermore, after five continuous cycles, the 5-Fe2O3/Bi-C photocatalyst showed good chemical stability and reusability, sustaining a degradation rate of over 96 % and a TOC removal of 80 %. Experiments on the identification of free radicals have demonstrated the important roles that O2−, h+, and OH species play in the photocatalytic process. The enhancement mechanism of 5-Fe2O3/Bi-C involves the successful synthesis of Fe2O3/Bi-C photocatalyst with well-aligned positions of band gap edges, enabling the facile charge transfer through S-Scheme mechanism. Furthermore, the study investigates the impact of environmental factors, including solution pH, water matrices, and the efficiency of the synthesized photocatalyst on other organic pollutants. The photocatalytic degradation behavior of CIP is predicted using LC-MS analysis. This work provides a new method for building S-scheme heterojunctions by creatively converting the type-II heterojunction system to an S-scheme by metal oxide doping.