Abstract
This work reports the electrical and thermal transport processes in p-type Pb-doped Mg3(1+x)Sb2-yPby (0.02 ≤ x ≤ 0.08; 0 ≤ y ≤ 0.02) compounds. Low-energy electron acceptor defects Mg vacancies are easy to form, which can provide holes and make p-type transport in the Mg3Sb2 matrix. However, with an increase in excess Mg, the transport behavior changes from p type to n type as manifested synergistically by both the Hall coefficient and Seebeck coefficient. This indicates the effective role of Mg in tuning carrier type and concentration for a pristine Mg3Sb2 compound. Upon substitution of Sb by Pb, the hole concentration slightly increases, and mobility is greatly improved by 133% at room temperature. The significant increase in mobility is attributed to the weakening ionized impurity scattering, stemming from the decreasing concentration induced by Pb doping. Thus, the power factor is enhanced with a 146% improvement at room temperature. Consequently, the figure of merit ZT of the Pb-doped sample is 1.8 times larger than the pristine one at around 300 K. Moreover, the non-degenerate transport behavior revealed by electrical properties is simply analyzed regarding the effects of minority carriers on the overall Seebeck coefficient. This study proposes a new strategy of charge compensation for improving mobility and a simple way to guide the prediction about the onset of bipolar conduction for Mg3Sb2-based compounds and other potential thermoelectric materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.