Characterizing stable nanocrystalline Cu-Ta behavior and failure dynamics under extremes of strain rate, strain, temperature and pressure by modified dynamic tensile extrusion

Abstract

This work presents characterization of thermo-mechanically stable, bulk nanocrystalline (NC) Cu-Ta alloys under a combination of extreme states using high-temperature, dynamic tensile extrusion experiments. The NC Cu-Ta was subjected to high dynamic strain rates up to 105/s, large plastic strains of 100–500 %, and high homologous temperatures greater than 50 %TM. This combination of thermo-mechanical conditions provides a unique look at how these extremely stable microstructures can accommodate and reconfigure under situations where dislocation activity is the most extreme, given constitutive relationships between strain rate, dislocation nucleation, and plastic work. Elevated temperature tests results reveal NC Cu-1Ta alloys are capable of forming a coherent jet, (25 mm in length by 1.8 mm in diameter) as it accelerates out of the die after being dynamically extruded. Microstructural analysis reveals that unlike previous reports on conventional un-stabilized nano or near nano-grained Cu, NC Cu-Ta alloys behave differently. They do not undergo grain coarsening via a nucleation and growth process, but rather behave identically to that of coarse-grained Cu. The NC grains elongate along the extrusion direction and at the same time shrink in diameter and develop a <111> type texture. Ultimately, the occurrence of premature dynamic failure was attributed to the inherent constraints posed by processing defects during synthesis.