Characterizing char particle fragmentation during pulverized coal combustion

Abstract

A particle population balance model was developed to predict the oxidation characteristics of an ensemble of char particles exposed to an environment in which their overall burning rates are controlled by the combined effects of oxygen diffusion through particle pores and chemical reactions (the zone II burning regime). The model allows for changes in particle size due to burning at the external surface, changes in particle apparent density due to internal burning at pore walls, and changes in the sizes and apparent densities of particles due to percolation type fragmentation. In percolation type fragmentation, fragments of all sizes less than that of the fragmenting particle are produced. The model follows the conversion of particles burning in a gaseous environment of specified temperature and oxygen content. The extent of conversion and particle size, apparent density, and temperature distributions are predicted in time.Experiments were performed in an entrained flow reactor to obtain the size and apparent density data needed to adjust model parameters. Pulverized Wyodak coal particles were injected into the reactor and char samples were extracted at selected residence times. The particle size distributions and apparent densities were measured for each sample extracted. The intrinsic chemical reactivity of the char to oxygen was also measured in experiments performed in a thermogravimetric analyzer. Data were used to adjust rate coefficients in a six-step reaction mechanism used to describe the oxidation process.Calculations made allowing for fragmentation with variations in the apparent densities of fragments yield the type of size, apparent density, and temperature distributions observed experimentally. These distributions broaden with increased char conversion in a manner that can only be predicted when fragmentation is accounted for with variations in fragment apparent density as well as size. The model also yields the type of ash size distributions observed experimentally.