Characterization of tungsten–titanium oxide electrode for electrochromic applications

Abstract

Titanium oxide films are of critical importance for the electrochromic device technology. The substrate, a conductive glass being coated with indium tin oxide (ITO) thin films, was deposited tungsten and titanium oxide by pulsed co-sputtering deposition system. The film thickness increased with the ion beam power. However, the slope of the curve of thickness against power at an ion beam power of less than 300W was greater than that at a power of 400 or 500W. A high ion beam power resulted produced a crystalline structure, as revealed by X-ray diffraction (XRD). Moreover, increasing the ion beam power resulted in the high Li-ions transport. The electrochromic behavior was optimal at an ion beam power of 200W.