Abstract
Hastelloy C-2000 and C-276 are primarily employed in the petrochemical and pharmaceutical industries. Finding an effective way to combine these alloys is still a complex task in industry. The main focus of this study is to investigate the potential efficacy of the spin arc welding process on Hastelloy C-2000 and C-276. The welding process was carried out under various conditions, such as weld current, spinning speed, and spin diameter. ERNiCrMo-4, with a diameter of 1.2 mm, was employed as a filler. Optical microscopy, XRD and FESEM were used for microstructural examination. The mechanical properties of the welded samples were critically analyzed. The results of the ultimate tensile strength (UTS), hardness value (HV), and impact tests of spin arc welding were compared with those of the multipass pulsed current gas tungsten arc welding process (MPCGTAW). In spin arc welding, Hastelloy C-2000 and C-276 exhibited higher UTS, HV, and toughness compared to MPCGTAW because there was no secondary TCP phase formation in the weld centre and hot cracking in spin arc weldments. Additionally, compared to MPCGTAW, the elongation with spin arc welding was noted to be lower. Moreover, microstructural analysis revealed no evidence of grain segregation, which may have contributed to the improved UTS and HV of the materials during spin arc welding. Thus, spin arc welding proves to be superior for dissimilar Hastelloy joints of C-2000 and C-276.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
