Abstract
The air blast shot peening of TC17 alloy was carried out at the air pressures ranges from 0.15MPa to 0.35MPa and processing durations ranges from 5min to 60min. The effects of the air pressure and processing duration on the microstructure and surface roughness of TC17 alloy were investigated. The experimental results showed that the microstructure gradually changed from nanocrystalline structure in the surface layer to the undeformed grains in the base TC17 alloy. The nanostructured surface layer with equiaxed grains and smallest grain size of 6.7nm was fabricated in base TC17 alloy. The grain size of nanostructured surface layer in the TC17 alloy decreased with an increase in the air pressure and processing duration. Meanwhile, the results indicated an increasing surface roughness and a decreasing mass of the TC17 alloy specimens with an increase in the air pressure and processing duration due to the air blast shot peening treatment.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
