Abstract
The addition of styrene butadiene styrene (SBS) to asphalt binders has led to enhanced performance in pavements across the entire range of working temperatures. SBS-modified binders have also proven to be more difficult to characterize in terms of their rheological properties. Low-temperature properties of asphalt binders are typically evaluated using the bending beam rheometer (BBR), which was developed to measure creep stiffness. Recent refinements to the BBR analysis have led to the development of Δ Tc which is meant to provide more insight into the relaxation properties of the binder. The Asphalt Binder Cracking Device (ABCD) was developed to improve on this characterization by also taking into consideration the failure strength and coefficient of thermal contraction. Previous research has shown that the ABCD provides more valuable insight into the effect of SBS on the low-temperature properties of asphalt binders. This paper will evaluate the ability of these two low-temperature tests to characterize the performance of five different asphalt binders with increasing concentrations of SBS. It was found that the evaluation of the materials using Δ Tc was inconsistent with binder type and generally indicated that SBS reduced cracking resistance, while the ABCD critical temperature and the proposed Δ Tf parameter generally showed an improved correlation with SBS concentration.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.