Abstract
Hazardous waste landfill leachate (HWLL) with high concentrations of salt and pollutants has created a bottleneck at hazardous waste landfills. This study applied a cement-based curing method to the disposal of HWLL. The highest contaminant fixing rate was achieved by adjusting the composition and proportion of the curing base, the content of additives, and the liquid-solid (L/S) ratio of the leachate to the curing base. The fixing rates for chemical oxygen demand and salt content in HWLL reached the highest values of 95.1% and 86.1%, respectively, when the Portland cement to metakaolin ratio was 3:2; the L/S was 1; and diatomite and activated carbon were added at 0.5% and 0.25%, respectively. The addition of glass fiber to the curing base improved the crack resistance of the solidified product. A simulated landfill experiment further indicated that after 116days of leaching, the leachate effluent pollutant concentrations of the landfill column were lower than the effluent standard. Solidification is a feasible method for HWLL disposal.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Environmental science and pollution research international
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
