Abstract
By using Radio Frequency (RF)magnetron sputtering method, Pb(Zr0.5Ti0.5)O3 (PZT)thin films were deposited on Pt/Ti/SiO2/Si substrates. Pt/Ti bottom electrode was fabricated on SiO2/Si substrates by magnetron dual-facing-target sputtering system. Phase and crystalline structure analyses of the PZT films were performed on an X-ray diffraction(XRD), Surface morphology, roughness and particle size of the PZT films were observed with MMAFM/STM+D3100 atomic force microscopy (AFM). Experiment results show that after annealing at 700 °C for 20 min, the thickness of PZT films can get perovskite structure. The surface of PZT thin films was uniform and density. Raw mean, Root Mean Square roughness and Mean roughness of PZT thin films is 34.357nm, 2.479nm and 1.954nm respectively. As test frequency was 1kHz, dielectric constant (ϵ) of PZT thin films was 327.6, electric hysteresis loop showed that coercive field (Ec), remanent polarization (Pr) and spontaneous polarization(Ps) of PZT thin films were 79.14 kV/cm, 37.78 μC/cm2 and 19.10 μC/cm2, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.