Characterization of Pseudospark Discharge-Based Multigap Plasma Cathode Electron Source for the Generation of Short Pulsed Energetic Electron Beam

Abstract

Pseudospark (PS) discharge-based devices are known as excellent source for the generation of high current density and energetic self-focused electron beam in the hollow cathode (HC) phase. In this article, short pulsed ( <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\!\!\!&lt; 100$ </tex-math></inline-formula> ns) and high energetic (~20 keV) electron beam has been generated and propagated (up to ~60 mm) in the drift region without using any external guiding magnetic field from the four-gap configuration of PS discharge-based plasma cathode electron (PD-PCE) source. The particle-in-cell (PIC) simulation code OOPIC Pro has been employed, whose results have shown the strong dependence of beam propagation into the drift region on the penetration and distribution of potential lines. The combined experimental and simulation investigations have also been carried for the multigap (four-gap) with wide range of external storage capacitor (40 pF–18 nF) and operating voltages (5–35 kV). The circuit parameter controls the appearance of HC phase for the energetic (50%–70% applied voltage) electron beam and conductive phase for the high current (~10 A to ~0.5 kA) electron beam. The potential distribution has clearly indicated that the electron beam with higher applied voltages can propagate more focused in the drift region. The investigations have evidently shown the generation of low energy and high current to high energy and low current electron beams suitable to cover the potential applications in the field of extreme ultraviolet (EUV)/soft X-ray radiation generation, surface modification, and microwave-terahertz radiation generation.