Characterization of polyphosphates by electrospray mass spectrometry

Abstract

Electrospray ionization mass spectrometry (ESI-MS) was applied for the characterization of inorganic polyphosphates [orthophosphate, pyrophosphate, tripolyphosphate, trimetaphosphate, and tetrapolyphosphatel. The high selectivity of ESI-MS allows the detection of different polyphosphate species without preseparation by ion chromatography or capillary electrophoresis. Furthermore, ESI-MS does not require the incorporation of UV-absorbing chromophores into the analytical method for the detection of phosphates, unlike conventional UV-chromatographic methods. Limits of detection by ESI-MS were estimated to range from approximately 1 to 10 ng/mL. The quantification of polyphosphate samples as single-component and multicomponent mixtures was investigated. Linear signal response for single-component samples ranged from the limit of detection to approximately 10 microg/mL Quantification of polyphosphate in streamwater is demonstrated using the standard addition method. The effect of multi-polyphosphate components and salts on signal response was also studied. For concentrations less than 2.0 microg/mL, signal response from a tetrapolyphosphate sample was comparable to those obtained from tetrapolyphosphate-tripolyphosphate mixtures. Signal response obtained from tetrapolyphosphate in the presence of tripolyphosphate or NH4NO3 at higher concentrations (approximately 50 microg/mL and 35 microg/mL, respectively) was significantly lower relative to single-component standards (approximately 40%-70%).