Abstract
The purpose of this work was to compare adhesion forces, contact area, and work of adhesion of salbutamol sulphate particles produced using micronization and a supercritical fluid technique (solution-enhanced dispersion by supercritical fluids--SEDS) using atomic force microscopy (AFM). Adhesion forces of individual particles of micronized and SEDS salbutamol against a highly orientated pyrolytic graphite surface were acquired in a liquid environment consistent with that of a pressurized metered dose inhaler. The forces were then related to contact area and work of adhesion. The raw adhesion force data for the micronized and SEDS material were 14.1 nN (SD 2.5 nN) and 4.2 nN (SD 0.8 nN), respectively. After correction for contact area, the forces per unit area were 13 mN/microm2 (SD 2.3 mN/microm2) and 3 mN/microm2 (SD 0.6 mN/microm2). The average work of adhesion was calculated using the Johnson-Kendall-Roberts theory and was found to be 19 mJm(-2) (SD 3.4 mJm(-2)) for the micronized particle and 4 mJm(-2) (SD 0.8 mJm(-2)) for the SEDS particle. It is possible to produce a three-dimensional representation of the contact area involved in the interaction and make quantitative comparisons between different particles. There was a lower force per unit area and work of adhesion observed for the SEDS material, possibly because of its lower surface free energy.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
