Abstract
In order to understand the performance of the PARIS (Photon Array for the studies with Radioactive Ion and Stable beams) detector, detailed characterization of two individual phoswich (LaBr3(Ce)-NaI(Tl)) elements has been carried out. The detector response is investigated over a wide range of Eγ = 0.6 to 22.6 MeV using radioactive sources and employing 11B(p,γ) reaction at Ep = 163 keV and Ep = 7.2 MeV . The linearity of energy response of the LaBr3(Ce) detector is tested upto 22.6 MeV using three different voltage dividers. The data acquisition system using CAEN digitizers is set up and optimized to get the best energy and time resolution. The energy resolution of ∼ 2.1% at Eγ = 22.6 MeV is measured for the configuration giving best linearity up to high energy. Time resolution of the phoswich detector is measured with a 60Co source after implementing CFD algorithm for the digitized pulses and is found to be excellent (FWHM ∼ 315 ps). In order to study the effect of count rate on detectors, the centroid position and width of the Eγ = 835 keV peak were measured upto 220 kHz count rate. The measured efficiency data with radioactive sources are in good agreement with GEANT4 based simulations. The total energy spectrum after the add-back of energy signals in phoswich components is also presented.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.