Abstract

Zinc oxide (ZnO) powder was first prepared by hydrothermal synthesis at low temperature. X-ray diffraction (XRD) investigation was carried out to examine the structural properties of ZnO powder. ZnO colloidal solution was deposited onto ITO/glass by rolling. After air drying, annealing in O2, atmospheric ambient was performed at 300 C and 400 C for 1 h. As the surface treatment, sintered ZnO film was immersed in 0.1 M HCl, washed with DIW and dried at room temperature. The Curcumin, a yellow-orange dye found in turmeric root, was used as a photosensitizer and was carefully prepared to avoid colour fading. Next, the ZnO film was dipped in dye solution for 15 h. High performance carbon counter electrode was prepared and used as a counter electrode. Two glass slides were offset and two binder clips were used to hold the electrodes together. Photovoltaic response of ZnO cell was measured and it was expected to utilize the DSSC application. The conversion efficiency of DSSC at 400oC (0.129%) was found to be larger than that of the cell at 300oC (0.117%).

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.