Abstract
This study is performed to characterize moderate or intense low-oxygen dilution (MILD) combustion (MC) versus conventional combustion (CC) of a premixed CH4/air jet flame in a hot coflow under identical inlet and ambient conditions. The present CC and MC correspond to the cases using a bluff-body (BB) and a no bluff-body (NBB), respectively. It is demonstrated that the NBB combustion develops by entraining ambient hot low-oxygen gas so as to dilute the reactant mixture and simultaneously heat up beyond the minimum autoignition temperature (Tai), leading to the MC. By contrast, in the BB case, the conventional flame is established and stabilized by a steady heat source of the recirculation zone (RZ) behind the BB with highly intense mixing and rapid ignition. A large reaction zone with uniform temperature distribution (i.e., low temperature rise) is found in the MC mode, while the CC has a much smaller size of the intense reaction zone with the concentrated high temperature and species distributions. Significantly, it has been first revealed that, in the BB case, there is a secondary combustion in the MC mode formed far downstream from the BB flame under the environmental condition of a high-temperature hot coflow.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.