Abstract
Mechanically mixed Al powders (150 μm in diameter) and different combinations of 21% volume fraction of SiC or Al 2O 3, (30 μm or 30 nm particle sizes) were green compacted to 70% density. The compactions were explosively consolidated in cylindrical fixtures utilizing ammonium nitrate-fuel oil (ANFO) to fabricate stacks of two-phase, cylindrical monoliths 50 mm × 32 mm (diameter), along with pure aluminum (Al-1100) monoliths (as reference). Results show that the consolidated aluminum increases from a starting powder hardness of 24 HV to 46 HV. Correspondingly, hardness for the two-phase systems exhibits an increment by ∼ 60% from the reference SWC Al-1100, while the total elongation declined by ∼ 60%. Microstructures for these systems were also observed by optical metallography and TEM to exhibit the different second phases' consolidation and its effect on the fracture mechanisms. Images presented show the different rupture mechanisms observed from the different systems' samples; the aluminum ductile-dimple fracture, the intergranular debonding caused by the micron-sized ceramic second phase and the quasicleavage and transgranular fractures caused by the nano-ceramic second phase.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
