Abstract
Low-frequency distributed acoustic sensing (LF-DAS) is one of the promising diagnostic techniques for detecting and characterizing hydraulic fractures. LF-DAS signals can capture fracture hits and the strain field around the hydraulic fracture. However, the interpretation of field LF-DAS data can be challenging due to the complexity of the underground conditions. This study develops a fracture propagation model to simulate the hydraulic fracturing process. The modelling results are analyzed to examine patterns and trends observed in interpreting field LF-DAS data. The fracture propagation model, coupled with the flow and geomechanical computations, is implemented in the MATLAB Reservoir Simulation Toolbox (MRST). The flow and geomechanical calculations are discretized by the finite volume and the virtual element methods, respectively. The hydraulic fracture is set to propagate along a prescribed path with a specific propagation or activation criterion. The accuracy of our model is validated against the KGD analytical solutions for the leak-off-viscosity, storage-viscosity and leak-off-toughness dominated regimes. The simulated stress and strain features are consistent with those interpreted from field LF-DAS signals. Several case studies and sensitivity analyses demonstrate the approach's utility and examine fracture interference, closure, and stress shadowing effects. The modelling work facilitates interpreting field measurement data by investigating characteristics of fracture hits from adjacent wells. The modelling method provides insights into fracture interference and its implications on optimal designs during hydraulic fracturing stimulation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have