Abstract
Microwave processing of \(O_3 - yPb(Zn_{1/3} Nb_{2/3} )O_3 - zPbTiO_3 Pb(Fe_{1/2} Ta_{1/2} )O_3 \) relaxor ferroelectric ceramics was investigated in a 2.45 GHz multimode cavity. The microwave-sintered samples were densified more rapidly and in a shorter time than the conventional sintered sample. A much smaller grain size and more uniform microstructure was developed in microwave heating. Dielectric measurement showed microwave sintered samples could obtain comparable dielectric properties (high pemittivity of 20,000) to the conventional. It was found that a high breakdown strength of 10 kV/mm and mechanical strength of 90 MPa can be achieved by the microwave method. It shows the potential to improve the figure of merit for the materials. The results reveal that microwave processing is a promising method for sintering the high dielectric ceramics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.