Abstract

Two types of samples were investigated by X-ray crystal truncation rod (CTR) and X-ray reflectivity measurements. One type was grown on sapphire substrate with nitridation process before deposition of low-temperature (LT)-AlN buffer layer. The other type was grown on sapphire substrate without the nitridation process. With the nitridation process, crystalline AlN was formed on the sapphire substrate and the LT-AlN buffer layer became crystalline. However, the crystalline quality of GaN and GaInN layer on the crystalline LT-AlN buffer layer was poor. It suggests that the lattice-mismatching between the crystallized AlN and GaN degrades the crystalline quality of GaN and GaInN layers. On the other hand, without the nitridation process, the LT-AlN buffer layer was amorphous or poor crystalline layer and the crystalline quality of GaN and GaInN on the LT-AlN buffer layer was good. It indicates that the amorphous or poor crystalline LT-AlN buffer layer works well as a buffer layer.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.