Characterization of Hydrogen-Encapsulated Type-I Silicon Clathrate

Abstract

This study describes a new stable inorganic clathrate compound encapsulating hydrogen in the Si cage structure. In this work, the characterization of the new type-I Si clathrate, Na6(H2)2Si46, is illustrated. Na6(H2)2Si46 was prepared from NaSi and NH4X (X = Cl and Br) under dynamic vacuum at 300 oC. Rietveld refinement of powder X-ray diffraction data was consistent with the clathrate type-I structure. Solid-state 1 H, 29 Si and 23 Na MAS NMR confirmed the presence of both hydrogen and sodium in the clatharte cages. 23 Na NMR indicated that the guest sites are not fully occupied by Na. In order to validate the structure and investigate the Na content, the synthesized particles were examined using spherical aberration (Cs) corrected VG HB501 scanning transmission electron microscope (STEM) operated at 100 kV. Fig. 2 shows a high-angle annular dark-field (HAADF) image taken along [100] with the convergence semi-angle of 20 mrad and collection semi-angle of 70-210 mrad. Image calculation was made with Kirkland’s code [3] with the thickness of 21 nm and defocus value of 22.5 nm. The calculated image inserted in Fig. 2 is in good agreement with the experimental one. The ring pattern and the center of the ring correspond to the Si24 cage and the 6d sites, respectively. When observed along [100], the 6d sites are aligned in an atomic column which is apart from the nearest columns by 0.23 nm so that the Na occupancy in the 6d sites can be determined by comparing the experimental intensity profiles with calculated ones. Fig. 3 shows an averaged experimental image using 2dx software [4] and calculated images with different Na occupancies in the 6d sites as well as intensity profiles along the line X-Y. The peak intensity at the