Characterization of high-power mechanical quality factor of piezoelectric ceramic discs under self-heating condition

Abstract

We have developed a method to characterize high-power mechanical quality factor Qm of a thickness-poled piezoelectric disc under self-heating condition. In order to obtain Qm from temperature and vibration measurements, a heat transfer model for a thin piezoelectric disc vibrating in its fundamental radial mode was built, and a numerical solution method based on the finite difference approach was developed to investigate the temperature rise of the piezoelectric disc as a function of position and time. Numerical simulations were performed to verify the validity of the model and to quantify the influence of different material parameters on the temperature rise. A theoretical formula for characterizing Qm of a piezoelectric disc was deduced according to the definition of the mechanical quality factor, in which the relationship among the self-heating parameters (hg), the sample vibration level (v0) and Qm was established. Furthermore, using a self-designed experimental equipment, we have characterized the high-power mechanical quality factor Qm of a PZT8 disc sample under different vibration levels using a tone-burst excitation, which can increase the operating electric field strength limits. The disc results show that Qm degrades drastically with increasing vibration amplitude. Especially, the Qm values measured under self-heating conditions have lower magnitudes than those measured using transient/burst method, indicating self-heating effects do significantly contribute to Qm characterization.