Abstract
The understanding of fouling behavior and mechanism is critical for fouling control in membrane processes. This study adopted a novel fluorescence front-face excitation-emission matrix (FF-EEM) approach to characterize the fluorescence foulants deposited on membrane surface. Methods for quantifying protein and humic substances deposited on ultrafiltration (UF) membrane were established. Foulants deposited on the membrane surface during the UF of model foulants (bovine serum albumin (BSA) and humic acids (HA)) and wastewater effluent organic matter (EfOM) were quantified using the FF-EEM and liquid EEM coupled with mass balance calculation. The foulants mass data obtained by FF-EEM were further used to analyze fouling mechanism involved in UF. The FF-EEM based method was more accurate than the liquid EEM based method, as the problems associated with liquid EEM based method (such as the error propagation in the mass balance calculation and the ineffectiveness of inner filter correction) were avoided in FF-EEM based method. The fouling resistance did not correlate well with the amount of foulants, as the major fouling mechanism instead of the mass of foulants mainly determined the extent of fouling. This work demonstrated FF-EEM could be a powerful tool for investigating fouling evolution and fouling mechanism in UF process.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
