Abstract
Several crystallization‐based techniques are used to measure the chemical‐composition distribution of polyolefins, but they are limited to semicrystalline polyolefins. Recently, high‐temperature thermal gradient interaction chromatography (HT‐TGIC) has been developed to quantify the chemical‐composition distribution of semicrystalline and amorphous polyolefins, thus broadening the range of techniques available for the analysis of polyolefin chemical‐composition distribution. In HT‐TGIC, the fractionation mechanism relies on the interaction of polyolefin chains with a graphite surface upon temperature change in an isocratic solvent. In the present investigation, a series of ethylene/1‐octene copolymers having approximately the same molecular weight average and different comonomer fractions (up to 25% of 1‐octene) is synthesized using a metallocene catalyst to investigate the fractionation mechanism of HT‐TGIC. Three copolymer samples and their blends are also studied to determine which operation parameters influence the HT‐TGIC peak shape and position. The cooling rate has no significant effect on the desorption temperature and the broadness of the HT‐TGIC chromatograms. On the other hand, the heating rate and the elution flow rate substantially influence the peak temperature and breadth. image
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.