Abstract
Coal-Supercritical CO2 (S-CO2) interaction causes severe mechanical alterations in coal that can possibly affect the mechanical competency and the coal seam integrity. Conventional static mechanical testings often fail to conduct repetitive and temporal measurements on coal specimens in the process of coal-S-CO2 interaction, thus unable to attain at decisive and reliable conclusions. Moreover, the said techniques fail to capture the mechanical anisotropies of heterogeneous coal mass that arise due to complex spatial distribution of mineral/maceral phases and fracture network. We combine three non-destructive techniques, viz. gamma-ray attenuation, ultrasonic technique and micro computed tomography to evaluate the S-CO2 interaction induced localized and anisotropic micro-structural alterations and the consequent mechanical response of a heterogeneous coal core specimen. Dynamic moduli were computed at radial and axial directions at natural condition, after 14 days and 45 days of S-CO2 interaction, and the resultant mechanical alterations were elucidated with the 3D-reconstructed micro-CT data collected at the same stages. Visualization and quantification of coal micro-structure emphasize that S-CO2-interacted coal mass is subjected to severe micro-cracking due to differential and free swelling, drying induced shrinkage and surface energy reduction, which can possibly lead to mechanical degradation. Spatial distribution of minerals and fractures at specific orientations significantly affects the gamma and ultrasonic wave propagation, thus can be successfully utilized to reflect the mechanical anisotropies. For same interaction condition and period, coal mass exhibits mechanical anisotropies and strength alterations at different levels, in which more heterogeneous mineral/maceral distribution causes significant localized mechanical alterations in mineral-rich areas, compared to that of comparatively homogeneous coal-rich regions. Temporal evaluation of strength parameters suggests that regardless of the considered orientations, significant strength alterations occur at initial stage of the coal-S-CO2 interaction process and the longer interaction causes only a slight strength reduction. Overall results conclude that S-CO2 induced mechanical property alterations in heterogeneous coal are highly localized and anisotropic, thus should be carefully evaluated in CO2 sequestration and ECBM extraction processes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have