Abstract
The inclusion of 2 wt% Zr50.7Cu28Al12.3Ni9 metallic glass (MG) powders successfully eliminated the hot cracks in AA-7075 specimens fabricated using laser powder bed fusion (LPBF). The microstructure analysis revealed a significant enhancement in grain refinement within the AA-7075/MG specimen as a result of the formation of Al3Zr precipitates. The average grain size reduced from 9.26 μm to 1.6 μm, and the previously coarser columnar grains transformed into finer equiaxed grains with random orientation. Moreover, the AA-7075/MG specimen demonstrated a noteworthy microhardness exceeding 160 HV. With an elongation of about 7.2%, the highest ultimate tensile stress and yield strength are 488.7 MPa and 460.8 MPa, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
