Abstract
The present paper reports the result of an inter-university experimental investigation on concrete shrinkage induced strains on embedded rebars instrumented with Distributed Optical Fiber Sensors (DOFS). The monitoring was performed for a standard 28 days drying time and for a shorter 6 days time span (reflecting realistic constructions schedules accelerations to meet set deadlines). The tested specimens were Reinforced Concrete (RC) tensile members differing in their geometry, DOFS employed and fiber/rebar bonding techniques. Regarding the latter, a combination of cyanoacrylate (for gluing) and silicone (protection) was found to be the optimal one for deployments inside RC structures. The DOFS-reported combined effect of concrete shrinkage and creep on the embedded rebars is compared with the Model Code 2010's predictions and employed to extract conclusions on the residual performance of the RC members at the end of their drying phase.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
