Characterization of centrifugal compressors operating in FRIB’s sub-atmospheric compression system

Abstract

Helium cryogenic systems operating below the normal boiling point (of 4.22 K) are required for many modern high-energy particle accelerators to achieve the necessary performance criteria. Temperatures below the normal boiling point are established by lowering saturation pressure below atmospheric conditions using vacuum equipment. FRIB operates a multi-stage string of cryogenic compressors (or ‘cold-compressors’) to achieve the sub-atmospheric pressures required (30 mbar) for the accelerator operating conditions of approximately 2 K. Housed within a vacuum insulated vessel (i.e., the sub-atmospheric cold box), the cold-compressor system re-pressurizes the helium from approximately 30 mbar to above atmospheric pressure condition before injecting the flow back into the helium refrigerator. Despite the implementation of cold-compressors in several existing large-scale cryogenic systems, openly available literature is insufficient to provide the information necessary for a general characterization of the performance and stability for these cold compressors. A one dimensional steady-state model to predict the performance of cryogenic centrifugal compressors has been developed. This model enables performance prediction by using optimally selected enthalpy loss correlations and basic impeller and diffuser geometrical data. The present work provides an initial comparison of the estimated performance of the individual and string of cryogenic centrifugal compressors to the operational / test data. With appropriate validation, the model is anticipated to allow assessment and prediction of optimal operational envelops that ensure stable and efficient operation at different operating conditions.