Abstract
Measurements of several parameters like flame length, soot free length fraction (SFLF), radiant fraction, gas temperature and emission levels are performed in coaxial LPG jet diffusion flame to provide an insight into the effect of lip thickness and inert addition on flame characteristics. The present measurements reveal that the visible flame length is found to be reduced with increase in lip thickness. In contrast, the flame length for all lip thicknesses gets enhanced by inert addition to the fuel stream, which can be attributed to the reduced diffusivity of the mixture gases. The SFLF is seen to be enhanced with N 2 addition due to decrease in the fuel concentration and flame temperature. However, the SFLF is reduced with increasing lip thickness of the bluff-body which is caused due to the reduction in induction period of soot formation. For all lip thickness, the NO x emission level is observed to be attenuated with inert (N 2) addition, which can be ascribed to reduction in residence time of gas mixture. Besides this, NO x emission level is enhanced with increasing lip thickness. The emission index of CO is found to be increased with nitrogen addition; in contrast, the EICO 2 is seen to be reduced, for all lip thickness. This can be attributed to attrition in residence time with inert addition that tends to inhibit the conversion of CO to CO 2. Moreover, EICO is also observed to be attenuated while EICO 2 gets enhanced, with increasing lip thickness which might be due to the increased residence time of mixture gases.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
