Abstract
In this study, the feasibility of bioflocculant extraction from backwashing sludge to reduce its production costs was investigated. Results showed that ultrasound and base treatment could significantly enhance bioflocculant extraction efficiency, however, flocculating activity was affected. It was observed that bioflocculants extracted from sludge of pH 11.0 had no flocculating activity. In contrast, bioflocculants extracted from sludge of pH 5.0, named as M-1, had good flocculating activity. To further study the flocculating activity of M-1, factors such as bioflocculant dosage, temperature and pH of the reaction solution were tested. The optimal conditions were 6.0 mg/l bioflocculant dosage and pH 5.0, at a temperature of 10 °C. Under these conditions, the flocculating rate of kaolin clay was 92.67%. The effectiveness of such bioflocculants in the decolorization of synthetically dyed wastewater was then examined. In flocculating methylene blue and fast blue in aqueous solutions, decolorization efficiency levels were 82.9% and 77.8%, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
