Abstract

This study focuses on the relationship between the plasma-photocatalytic activity for CH 3CHO (acetaldehyde) decomposition and the surface properties of pure TiO 2 and 10.0 mol% Bi/TiO 2 nano-sized. The TiO 2 and Bi/TiO 2 particles, which were synthesized through the solvothermal method, exhibited a uniformly spherical anatase structure with particle size below 25 nm. The surface area was large (310 m 2/g) as compared with that of pure TiO 2 (140 m 2/g). Bi/TiO 2 adsorbed a smaller amount of water than pure TiO 2. From the H 2-TPR result, it was identified that Ti 3+ could be easily transferred into Ti 0, which affected the photoreaction, over Bi/TiO 2 compared with pure TiO 2. Based on these results, without H 2O addition, acetaldehyde decomposition was higher on Bi/TiO 2 (80% after 40 min). In particular, the by-product (mainly CH 3COOH), a serious problem in the plasma system, was very small in Bi/TiO 2 (below 5.0%) compared with that in pure TiO 2, which was above 20.0%. However, the acetaldehyde removal slightly increased over Bi/TiO 2 with H 2O addition, while it remarkably enhanced over pure TiO 2. This result means that H 2O addition did not have a good influence on acetaldehyde removal over the Bi/TiO 2 with hydrophobic property. However, it did exert a better influence on pure TiO 2 with hydrophilic property.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.