Abstract
The ballistic impact behavior of wired glass has been studied. Three types of commercially available samples, with thin and thick wire mesh, were impacted with steel, glass, and tungsten carbide spheres of various sizes using a gas gun. Impact energies varied from 0.5 to 40 J. A system of cracks was found to develop that comprised primarily a major cone crack. At higher energies, additional radial and lateral cracking developed along with increased damage to the front face of the sample. The extent of damage was assessed in terms of basal cone crack area, number of cracks, mass loss, and fracture load of impacted samples. It was found that damage, at a given impact energy, increased with increasing projectile diameter. Moreover, 10 mm diameter glass spheres caused more damage than smaller (3–4.74 mm diameter) steel spheres. No significant differences were observed with regard to the ballistic behavior of the thin‐ and thick‐wired glass types.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Applied Ceramic Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
