Abstract

Metal-supported solid oxide fuel cells (MS-SOFCs) exhibit better electrochemical performance than conventional ceramic-supported cells at lower temperature due to their exceptional thermal, electrical, and mechanical properties. MS-SOFCs can withstand rapid thermal cycling operation and make it practical for mobile applications. A reliable seal is essential for electrolyte/metallic interconnect joint in MS-SOFC applications. In the present study, we proposed an Ag-Ge alloy filler as a high-temperature brazing sealant for use in MS-SOFCs. Commercial ferritic stainless steel (Crofer22H) and La1-XSrXGa1-yMgyO3- δ (LSGM) substrate were employed as metallic interconnect and electrolyte for this study, respectively. The adhesive and hermetic characterization for the electrolyte/metallic interconnect joint joined by the Ag-Ge alloy filler were examined by using high-temperature leak test at elevated temperatures. Results showed that the leak rate of LSGM/Crofer22H coupon is 5 x 10-4 mbar∙l/s/cm after aging at 750 °C for 90 hours in He/air. In addition, SEM/EDS analyses also revealed that Ge element in the Ag-Ge filler was prone to diffuse toward Crofer22H and LSGM side, and thus improved the interfacial adhesion of the LSGM/Crofer22H joint.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.