Characterization of a vertical crack using Laser Spot Thermography

Abstract

ABSTRACT This paper deals with the solution of an inverse problem for the heat equation aimed at nondestructive evaluation of fractures, emerging on the accessible surface of a slab, by means of Active Thermography. In real life, this surface is heated with a laser and its temperature is measured for a time interval by means of an infrared camera. A fundamental step in iterative inversion methods is the numerical solution of the underlying direct mathematical model. Usually, this step requires specific techniques in order to limit an abnormal use of memory resources and computing time due to excessively fine meshes necessary to follow a very thin fracture in the domain. Our contribution to this problem consists in decomposing the temperature of the damaged specimen as a sum of a term (with known analytical form) due to an infinite virtual fracture and the solution of an initial boundary value problem for the heat equation on one side of the fracture (i.e. on a rectangular domain). The depth of the fracture is a variable parameter in the boundary conditions that must be estimated from additional data (usually, measurements of the surface temperature). We apply our method to the detection of simulated cracks in concrete and steel specimens.