Abstract
Hemp shives is a lightweight material known for its insulating properties. Associating these bio-fibers with plant-based matrix instead of a mineral binder in insulation applications is of ecological interest. This article describes the study of a low environmental impact 100% plant-based material made solely from wheat starch and hemp shives. The hemp/starch ratio (H/S) influence and hemp shive size are studied. Samples are evaluated in terms of physical properties, mechanical behaviour and hygrothermal properties through an experimental approach. Results show that increasing 0–5mm hemp shive proportion from 15% to 30% leads to a significant enhancement of the mechanical and hygric characteristics due to the load transfer and porosity. However, when the H/S ratio increases, mechanical and hygrothermal characteristics decrease slightly. Finally, the hemp-starch agro-material with H/S equal to 8 and 30% of 0–5mm hemp shive seems to be the optimal composition between the studied samples.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.